Step 1: Gather Materials
You will need a wooden box, Mod Podge glue, a foam brush, a damp cloth, a dry cloth, a variety of family pictures printed on a laser printer, a razor blade or exacto knife, sandpaper, Krylon Acrylic Matte Finish spray and distressing supplies, if desired.
Before you start gluing, it's a good idea to have all of your pictures trimmed. Get an idea of where to place each picture by laying them in position on the box. Once you have a plan, use the foam brush and apply a thin layer of glue on the wood box. Apply just enough glue to cover the space where the first picture will go. Use the dry cloth to rub the picture flat, making sure there aren't any air bubbles. For the next picture, again apply a thin layer of glue where that picture will be placed. Be sure to place glue over the first picture where the second one overlaps. Place the second picture and LIGHTLY wipe around it using your damp cloth to remove any excess glue. Then use the dry cloth to smooth the picture and remove any air bubbles. Rub gently. If you rub too hard you will rub the picture off. Continue for all sides of the box until the box is covered with your pictures. It's a good idea to have a variety of picture sizes available to fill in spaces as you work through the project. We also like to print our pictures in a combination of black/white (gray scale) and sepia for visual interest.
Step 3: Trim Edges
Trim any overhanging paper edges using your razor blade or exacto knife. (Make sure that the glue has dried before you trim! Otherwise you will just tear your picture.) If you have glued a picture that covers both the lid and the box, take your razor blade and cut along the seam to separate the picture.
Step 4: Sand and Distress Button Box
After all of your pictures are glued, trimmed and dry, sand the edges of your box using the piece of sandpaper. We like to soften the corners to help 'age' the box. Rubbing distress ink or chalk on the edges will also give the project an authentic 'old' look. Let the ink dry before giving it 2 or 3 coats of the Matte Finish Spray. This seals your project and protects the pictures.